Real estate automation is worth doing in three places: replying to a new enquiry within minutes, following up everyone who came through an open home, and reminding vendors and prospects about appraisals and next steps. It is not worth using on price conversations, listing advice or anything your licence makes you responsible for. Those stay with the agent, and the automation’s job is to get the agent to them with the right information in hand.
This article is for principals and agents running a small or mid-sized agency in Australia. It describes what to automate, how each piece works, and the check a person does before and after. We have not quoted any statistics here. Where rules apply, we point you to the regulator, because they differ by state and territory.
Where agencies lose enquiries and follow-up
A typical agency has the same gaps. A portal enquiry lands in a shared inbox and is read an hour later by whoever is free. A buyer who came to the open home on Saturday gets a call on Tuesday, if at all. A vendor who had an appraisal three weeks ago has not heard from anyone since. A property manager leaves a note in a diary that nobody reads.
None of those are skill problems. They are timing and memory problems, and software is good at timing and memory. It is not good at judgement, which is where agents earn their commission.
Enquiry reply: the first automation to build
Trigger: a portal enquiry, a website form, a call to your office number that was missed, or a message to the agency’s social page.
Steps:
- The enquiry is recorded in your CRM against the property, with the source (which portal, which form).
- An instant reply goes to the person by text or email. It names the property, says which agent will be in touch and roughly when, and asks one question, such as whether they are buying to live in or to invest, or whether they have a finance pre-approval.
- The listing agent gets a notification with the details.
- If the enquiry has not been picked up within a time you choose, it is flagged to a second person.
The check a person does: every morning, one person scans enquiries from the past 24 hours that have no personal reply. This catches the ones that slipped through.
What stays with the agent: any statement about price expectations, comparable sales or what the vendor will accept. The automatic reply should never quote a price guide that the agent has not approved.
If you only build one thing, build this one. Our guide on how fast to reply to an enquiry covers the targets, and the same idea applies to every web form.
Open home follow-up that does not rely on memory
This is where most agencies have the biggest gap and the easiest win. The attendee list exists, usually on a tablet or a sign-in sheet. The follow-up often does not.
Trigger: a visitor signs in at an open home, on a tablet, a QR code or a paper sheet that someone types in afterwards.
Steps:
- The visitor is added to the CRM against the property, with any answers to sign-in questions (buying or renting, finance status, timing).
- That evening, a short message thanks them for coming and offers the contract of sale, or the rental application link, or a time for a second inspection.
- Two days later, if they have not replied, one more message goes out with a direct question, such as whether the property suits what they are looking for.
- Visitors who reply are moved into a “hot” list for the agent to call.
The check a person does: the agent reads the replies and calls the hot list the next morning. The automation hands over to them and stops.
What stays with the agent: negotiating, answering questions about the property’s condition, and any statements about the sale. Representations made to a buyer carry consequences under your state’s rules, so they come from a person who knows the property and the rules.
The same logic applies to display homes, which we cover in our guide to display home visitor follow-up.
Appraisal and vendor reminders
Many listings are lost between the appraisal and the agency agreement. The vendor was keen, the agent was busy, and another agency called back sooner.
Trigger: an appraisal is booked, held, or sent, or a vendor has been quiet for a set number of days.
Steps:
- A reminder goes to the vendor the day before the appraisal, with the agent’s name and what to have on hand.
- After the appraisal, the agent’s own message, written by them, goes out. The automation logs it and schedules a prompt for a follow-up call in a few days.
- If the vendor has not responded, the agent gets a task, not a vendor message. Chasing a vendor on a listing decision is a phone call.
What stays with the agent: the appraisal figure, the marketing recommendation and the agency agreement. Nothing automatic should send a price range.
Real estate marketing automation: past contacts and database
Most agencies hold a database of past buyers, past vendors and neighbours. It is under-used because mailing it feels like work.
A sensible setup tags contacts by what they did (inspected, appraised, sold, rented), and sends a short, relevant message when something changes: a new listing near them, a sale in their street, or an annual check-in on how the property is going. Our guide on database reactivation campaigns covers how to approach this without annoying people.
Before you send marketing by text or email, make sure you have the right consent and an unsubscribe option. The rules sit with the Australian Communications and Media Authority, and we summarise them in our guide to SMS marketing rules in Australia. Check the ACMA site for your situation.
What not to automate in an agency
- Price and valuation talk. Anything that sounds like an estimate of what a property will sell for should come from a licensed person who has seen the property.
- Offers and negotiation. Even a message acknowledging an offer should be sent by the agent.
- Trust account and money movements. Keep these in your trust accounting software, with people and checks the law expects.
- Complaints. A cross vendor gets a call.
- Personal information beyond what you need. Collect what the follow-up uses. Our guide on AI and the Privacy Act covers what to consider if AI writes or reads any of it.
State and territory rules on agent conduct, advertising and licensing differ. Check with your state’s fair trading or licensing body for what applies to you.
Choosing real estate workflow automation tools
Many agency CRMs have some automation inside them. Start by listing which of the three jobs above your CRM already handles. If it does the enquiry reply and an open home sequence, you may need nothing more.
If your CRM does not, or if you use several systems that do not talk to each other, then a connecting layer is the next step. CentriWeb sets up automation and CRM for property businesses, mostly in n8n and GoHighLevel, and we would tell you if the system you already pay for does the job.
Whatever you choose, ask who watches it. Automations break when a portal changes a field or a login expires. Someone needs to see the failure on the day.
How to tell whether it is working
Pick three numbers from your own records and look at them monthly. The first is the time between an enquiry arriving and the first personal reply. The second is the share of open home visitors who got a follow-up within a day. The third is how many appraisals turned into listing agreements, compared with the months before you started.
Do not expect the third to move fast, and do not read much into one quiet month. Listings depend on the market, the agent and the vendor. What you are checking is that nothing falls through the gaps, and that the agents trust the system enough to use it. If agents are ignoring the notifications, the notifications are wrong: too many, too early, or sent for the wrong enquiries. Ask the agents what they would change and change it.
Also keep a short list of the enquiries that went badly: a reply sent to the wrong property, a reminder that arrived after the appraisal, a vendor who got a message while upset. Each one tells you a rule to add, usually a pause or an exclusion, and the list is the best training material for the next person who works on it.
A first-month plan
- Week one: write the instant enquiry reply, in the voice of the agent who will follow up.
- Week two: set up the open home sign-in so the data lands in one place.
- Week three: write the two follow-up messages and agree who calls the hot list.
- Week four: read what went out. Fix anything that sounds like a form letter.
Run it on one agent’s listings first. If it works there, roll it out to the rest.