A CRM for HVAC companies tracks every lead and quote, then runs the repeat-work side of the business: maintenance agreement renewals, seasonal tune-up campaigns and follow-ups on replacement estimates. Field service software schedules and bills the work, and the CRM, or the follow-up tools inside the field software, decides who hears from you and when.
HVAC suits automation more than most trades because the calendar is predictable and the repeat customer base is large.
Why HVAC follow-up is different
An HVAC company has two businesses in one. Repair and replacement is driven by breakdowns and heat waves, with urgent calls and large quotes. Maintenance is driven by the calendar, with agreements that renew each year and visits before summer and winter. A CRM has to treat them differently:
- Emergency calls need an instant response, because someone with no heating on a cold night rings the next company.
- Replacement quotes run into thousands and often take weeks to decide, so follow-up must be patient.
- Maintenance agreements renew on a known date, so reminders can be fully automatic.
- Seasonal campaigns go to the whole customer list before the busy months, and the list needs to be clean to work.
Field service software or a CRM for HVAC: how they divide the work
Three HVAC-capable field service products, with what their own pages say, as at November 2026 (check their pages for current prices):
| Housecall Pro | FieldEdge | ServiceTitan | |
|---|---|---|---|
| Maintenance agreements | Recurring service plans on the Max plan | Service agreements, with tools to sell more of them | Service Agreements listed as a product |
| Marketing and follow-up | Pipeline add-on has lead tracking and automated follow-ups; Campaigns add-on | MarketingEdge: email marketing and two-way texting | Marketing and Marketing Pro |
| Prices on the page | Basic $59, Essentials $149, Max $299 a month on annual billing | Not shown on the page | Not shown, demo request |
Sources: Housecall Pro pricing, FieldEdge and ServiceTitan. FieldEdge describes itself as software for HVAC, plumbing and electrical contractors, mainly with multiple trucks. Housecall Pro lists Max as including eight users. None of the three is wrong for an HVAC business, and which suits depends on fleet size, the phone setup and how much of the marketing you want in one tool. Our guide on CRM versus job management software explains the divide.
The automations that bring HVAC repeat work
Maintenance agreement renewals
This is the highest-value automation in the trade. An agreement customer is the one most likely to call you first for a repair and to buy a replacement from you. A renewal sequence might send a notice 60 days out, a reminder at 30, a call at 14 and a lapse message after the date, with the visit booking link in each. Include a card-on-file update where your payment tool allows it.
Seasonal tune-up campaigns
A message in early spring for cooling and early autumn for heating, with a booking link, works best sent to customers whose last visit was about a year ago. Segment by system type and age where you have it, since a ten-year-old furnace needs a different message from a new heat pump.
Replacement estimate follow-up
Replacement quotes need a calm pattern: a thank-you the day after the visit, a question at three days, a check at ten days and a monthly note afterwards. If financing is available, mention it once. Housecall Pro lists consumer financing among its features, and other platforms offer their own, so check what you can actually offer.
After-service and reviews
A message the day after a visit asking if everything is working, and a review request when the answer is yes, brings in new customers and catches problems before they become complaints. See automated review requests for set-up.
Rules for marketing texts and emails in the United States
Seasonal campaigns are marketing, and two federal rules apply. The FTC’s CAN-SPAM guide says commercial email must carry a valid physical postal address and a clear opt-out, and that opt-outs must be honoured within 10 business days (FTC CAN-SPAM guide). For texts and calls to mobile numbers, the FCC rule at 47 CFR 64.1200 requires prior express written consent for calls that include an advertisement or are telemarketing (47 CFR 64.1200). Whether a given text is covered is a legal question, so check it for your company. Other countries have their own rules. This is not legal advice.
What an HVAC customer record needs
HVAC follow-up depends on equipment, so the customer record has to hold more than a name and address. Useful fields are the make, model and install year of each system, the filter size, the last service date, the agreement type and renewal date, and notes from technicians such as access issues or a part that was recommended and declined. With those, your CRM can send a message that makes sense: a note to someone with a 15-year-old system that you have seen an increase in failures at that age is more useful than a generic discount email.
Declined work is the most overlooked field. If a technician recommended a capacitor, a duct repair or a new thermostat and the customer said not now, set a task to raise it again before the busy season. It is a warm lead you already paid to find.
Emergency calls and after-hours enquiries
Heat waves and cold snaps bring a flood of calls at once. A rule that texts every missed caller within a minute, collects the address and the fault and flags vulnerable customers, such as elderly or those with young children, helps the on-call tech sort the list. A message that works for an after-hours enquiry:
Thanks for contacting [Business]. We have your message about [issue] at [address]. A technician will confirm a time by [time]. If you smell gas or burning, leave the building and call your emergency number now.
That last line matters. Never use an automatic reply to give safety advice beyond directing people to emergency services. Where you use an AI or answering service for calls, have it hand over to a person for anything that sounds like a safety risk.
After a heat wave or cold snap, review the week. Count the calls that came in, how many were answered live, how many got a text within a minute and how many turned into booked jobs. A short review like this shows whether the weak point was the phone, the dispatch board or the follow-up, and it gives you a figure to compare with the next peak.
A worked example with agreement customers
Take an example company with 500 maintenance agreement customers paying $200 a year. If 70 percent renew on their own and a reminder sequence lifts that to 75 percent, that is 25 more renewals, or $5,000 a year, plus the visits and repair work that follow. The numbers are invented, so use your own: count agreements that lapsed last year and how many were contacted before the date.
Where the CRM and the field software meet
The two should share the customer, the system and the service date. When a visit is marked complete in the field tool, the next reminder should start in the CRM. When a lead accepts a quote, the job should appear in the field tool. If your answering is also part of this chain, see our guide on answering services for HVAC companies. CentriWeb sets up these connections and the follow-up behind them, and our run with less admin service covers the renewals and reminders. See also our trades page.